Textile Kitchenware Cup

Do you want to diversify the kitchen interior with maximum effect and without significant financial costs? Then pay attention to textile accessories: a bright tablecloth, napkins of different shapes, new kitchen towels, and unusual textile baskets and cups will not only refresh the interior, but also transform it beyond recognition. Due to the softness of the fabric textile cups look very cozy. In addition, they are functional: you can store kitchen utensils, kulёchki, napkins, and even dried fruits or candies. Fabric cups are easy to use and save space in the kitchen: you can both put them in and hang them over a sturdy loop. To create a cup, you need two types of cotton (with a thematic kitchen pattern for the outside of the cup and matching in color, in this case red, for the inner cover),synthetic winterizer and flizelin to strengthen textile parts, as well as a plastic container out of the water.
 To create a cup
Modeling a pattern. Capacity from under water will be the main part of the cup. Textile parts must be well matched to its size. In order not to be mistaken in the cutting of details and to correctly choose the size of cotton elements, measure the width of the neck and the height of the plastic cup.
 measure the width of the neck
 plastic cup height
In this case, it is 10 and 13 cm, respectively. Multiply the cup's width (10 cm) by 3.14 and add 3 cm (10x3.14 + 3 cm = 35 cm), add half the neck diameter (10/2 = 5 cm) and 4 cm to the height of the glass (13 cm) (13 + 5 + 4 = 22 cm). Cutting and assembly of parts. From blue and red cotton, cut two rectangles measuring 35x22 cm.
 Cutting and assembling parts
Strengthen every part from the inside with non-woven fabric.
Cutting and assembly of parts
Take the fabric intended for the outside of the cup.Pin to the inside out pinned through a wet cloth padding polyester.
 Cutting and assembling parts
Bend the fabric in the middle and lay a straight line on three sides.
 Cutting and assembling parts
Sharp scissors from the outside of the seam cut the sintepon.
 Cutting assembly of parts
Grasp the corners and align the base seam and the side seam.
 Cutting and assembling parts
Step back from the top of the corner of 5 cm and lay a straight line, thus forming the volume of the bottom. Similarly, process the second corner.
Cutting and assembling parts Should get such a stack chick.
 Cutting and assembling parts
Similarly, make an inner case, but without a synthetic padding.
Cutting and assembling parts
These should be the main parts of the cup at this stage. Insert the plastic container into the outer cup, and the inner case into it. Bend the edges of the fabric blanks inside and fix them with tailor pins or basting stitches.
 textile cup
 textile cup
Make a buttonhole from red cotton. Insert it between the parts. To complete the work, lay a straight or decorative stitch around the perimeter of the glass.